Sennheiser Bluetooth Headset EZX 60 User Guide

®
Bluetooth Headset  
EZX 60  
Instruction manual  
 
Contents  
Contents  
Important safety information ........................................................................... 2  
Delivery includes .................................................................................................. 4  
Features of the EZX 60 ....................................................................................... 5  
Operating elements ............................................................................................. 6  
Overview of pictograms ...................................................................................... 7  
Overview of buttons ............................................................................................ 8  
LED indications ..................................................................................................... 9  
Putting the EZX 60 into operation ................................................................. 10  
Charging the headset battery ................................................................................. 10  
Switching the headset on ........................................................................................ 11  
Establishing Bluetooth connections ....................................................................... 11  
Switching the headset off ........................................................................................ 12  
Pairing the headset ................................................................................................... 12  
Using the EZX 60 ................................................................................................ 14  
Wearing the headset ................................................................................................ 14  
Calling ........................................................................................................................... 15  
Muting/unmuting the headset’s microphone ..................................................... 17  
Changing the speaker volume ................................................................................. 18  
Changing the ring tone volume .............................................................................. 18  
If you are out of the transmission range .............................................................. 18  
Restoring factory default settings ......................................................................... 19  
Cleaning and maintaining the EZX 60 ........................................................... 20  
Accessories .......................................................................................................... 21  
Specifications ...................................................................................................... 22  
Manufacturer declarations ............................................................................... 23  
1
 
Important safety information  
Important safety information  
The EZX 60 has been manufactured according to the accepted rules of  
safety and current technology. However, there is still a danger of damage  
to equipment if the following general safety instructions are not complied  
with.  
Read this instruction manual.  
Follow these instructions.  
Keep this instruction manual in a location where it is accessible to all  
users at all times.  
Always include this instruction manual when passing the EZX 60 on to  
third parties.  
Intended use  
®
The EZX 60 is an accessory for mobile phones or any Bluetooth compliant  
device with a “hands free profile” (HFP) or a “headset profile” (HSP). It is  
intended for wireless communication via Bluetooth connection in dry  
environments.  
It is considered improper use when the EZX 60 is used  
for any application not named in these instructions,  
under operating conditions that deviate from those described in these  
instructions.  
General instructions  
Never disassemble or modify components of the EZX 60.  
The built-in rechargeable battery may present a fire or chemical burn  
hazard if mistreated. Therefore, do not disassemble, heat above 40°C  
(104°F) or incinerate the rechargeable battery.  
Sennheiser Communications is not liable for damages resulting from  
the loss of connection due to a run flat battery, an old battery or  
exceeding the transmission range.  
Before operation  
Use the EZX 60 in dry places only and keep liquids and small electrically  
conductive parts away from the EZX 60 and its connecting sockets.  
Do not expose the EZX 60 to extreme temperatures. Normal operating  
temperatures are 10°C (50°F) to 40°C (104°F).  
Store the headset in a clean, dust-free environment.  
During charging  
Do not wear the headset when charging.  
Sennheiser Communications is not liable for damages to USB devices  
that are not consistent with the USB specifications.  
The headset must be charged either with the EZX 60 power supply, the  
Sennheiser USB car charger adapter or via a USB socket of a computer.  
Never try to charge batteries other than the one in the EZX 60 headset  
with the EZX 60 power supply or the USB car charger adapter.  
2
 
Important safety information  
During operation  
Avoid listening at high volume levels for long periods since this leads to  
permanent hearing damage.  
Observe your country’s regulations for the use of mobile phones, head-  
sets and hands-free equipment in traffic. Always focus your attention  
on driving safely!  
This equipment generates, uses and can radiate radio frequency energy  
and, if not used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation.  
Only use the headset in aircrafts where wireless Bluetooth transmis-  
sion is permitted.  
The headset contains magnets that generate a magnetic field which  
could cause interferences with cardiac pacemakers and implanted defi-  
brillators. Keep the headset at least 1.2” (3 cm) from cardiac pace-  
makers or implanted defibrillators.  
Safety instructions for Lithium-Polymer rechargeable batteries  
The EZX 60 has a built-in Lithium-Polymer rechargeable battery. If abused  
or misused, rechargeable batteries may leak.  
In extreme cases, rechargeable batteries may even present  
a heat hazard,  
a fire hazard,  
an explosion hazard,  
a smoke and gas hazard.  
Please understand that Sennheiser Communications does not accept  
liability for damage arising from abuse or misuse.  
Keep away from children.  
Do not heat above 40°C (104°F), e.g. do not expose to sunlight  
or throw into a fire.  
Do not expose to moisture.  
Do not short-circuit.  
Do not mutilate or dismantle.  
Only charge rechargeable batteries with the appropriate  
Sennheiser Communications chargers.  
Only charge rechargeable batteries at ambient temperatures  
between 10°C (50°F) and 40°C (104°F).  
Do not charge the rechargeable battery if the device is obviously  
defective.  
When not using rechargeable batteries for extended periods  
of time, charge them regularly (every six months for about  
one hour).  
Store the devices/rechargeable batteries in a cool and dry place  
at room temperature (approx. 20°C (68°F)).  
Return defective devices or devices with defective rechargeable  
batteries to your specialist dealer.  
3
 
Delivery includes  
Delivery includes  
1
EZX 60 Bluetooth headset  
with built-in rechargeable Lithium-Polymer battery  
1
1
1
1
earhook, flexible  
EZX 60 power supply (EU/UK/US/AU version)  
quick guide  
safety guide  
4
 
Features of the EZX 60  
Features of the EZX 60  
Flexible and removable earhook for easy wear  
Can be worn on either left or right ear  
Bluetooth 2.1 + EDR: compatible with all Bluetooth 1.1, 1.2, 2.0 and 2.1  
devices that support the “hands free profile” (HFP) or “headset profile”  
(HSP)  
Up to 7.5 hours talk time  
Up to 300 hours standby time  
Digital noise and echo suppression  
Superior Sennheiser audio quality  
Extremely lightweight and comfortable (12 grams)  
5
 
Operating elements  
Operating elements  
³ Multi-function button  
· Socket for power supply  
» Earhook (flexible)  
¿ LED  
·
´
³
»
¿
´ Earpiece  
² Microphone  
Volume down button  
º Volume up button  
º
²
¾ EZX 60 power supply  
(EU/UK/US/AU version)  
µ Charging plug  
µ
¾
6
 
Overview of pictograms  
Overview of pictograms  
Meaning of the pictograms for pressing a button  
Pictogram  
Meaning  
Briefly press this button.  
Double-press this button.  
Keep this button pressed.  
2x  
Keep this button pressed for 5 seconds.  
5 s  
Meaning of the pictograms for the flashing of the LED  
Pictogram  
Meaning  
This pictogram symbolizes a flashing.  
This pictogram symbolizes an interruption.  
This pictogram symbolizes a time interval.  
Examples of some of the pictograms that are used throughout this instruc-  
tion manual:  
Pictogram  
Meaning  
The LED flashes rapidly.  
The LED flashes once every 3 seconds.  
The LED flashes 3 times per second.  
3s  
The pictogram “i”  
This note provides important information!  
Notes marked with the pictogram “i” provide important infor-  
mation on the use of the headset.  
7
 
Overview of buttons  
Overview of buttons  
Button  
To be pressed To ...  
accept an incoming call  
Page  
15  
end a call  
16  
voice dial*  
16  
reject an incoming call  
15  
2x  
transfer a call between headset  
and mobile phone*  
17  
redial*  
15  
17  
2 s  
5 s  
mute/unmute the microphone  
switch the headset on or off  
11/12  
enter pairing mode  
12  
8 s  
increase the ring tone volume* or 18  
speaker volume by 1 step  
increase the ring tone volume* or 18  
audio volume continuously  
reduce the ring tone volume* or 18  
speaker volume by 1 step  
reduce the ring tone volume* or 18  
audio volume continuously  
* These functions must be supported by the mobile phone.  
8
 
LED indications  
LED indications  
Meaning during operation  
LED flashing  
Meaning during operation  
rapidly  
Pairing mode  
once every 5 seconds  
Searching mode  
Standby mode  
5s  
5s  
4s  
4s  
once every 5 seconds  
3 times every 4 seconds  
twice every 4 seconds  
Call establishment  
Active call mode  
For a more detailed description of the LED indications, see “Switching the  
headset on” on page 11.  
When the LED ¿ flashes three times every 5 seconds, the  
battery is almost empty.  
Meaning during charging  
LED  
Meaning during charging  
lights up constantly  
Charging in progress  
flashes once every 2 seconds Charging complete  
2s  
9
 
Putting the EZX 60 into operation  
Putting the EZX 60 into operation  
Charging the headset battery  
If you charge the battery for the first time, allow charging for at least  
2.5 hours without interruption. Later, 2 hours will suffice to fully charge  
the battery. The headset cannot be used during the charging process.  
To charge the battery in the headset:  
WARNING Danger of injury!  
Wearing the headset when charging can cause burns and  
injuries.  
̈ Do not wear the headset when charging.  
̈ Take off the headset and switch it off (see page 12).  
̈ Connect the charging plug µ to the socket for power supply ·  
If you use the optional charging accessories (see “Accessories“ on  
page 21)*:  
*
EU  
UK  
US  
AU  
¾
2h  
µ
̈ Connect the USB charging cable to the socket for power supply ·.  
̈ Connect the USB plug of the USB charging cable to:  
– a USB socket of a computer  
– or the USB socket of the USB car charger adapter  
̈ Connect the USB car charger adapter to the appropriate power outlet.  
During charging, the LED ¿ lights up blue. All active connections will be  
interrupted. When charging is complete, the LED ¿ flashes once every  
2 seconds.  
A fully charged battery provides a talk time of up to 7.5 hours or a standby  
time of up to 300 hours.  
10  
 
Putting the EZX 60 into operation  
When the battery is about to run flat:  
The LED ¿ flashes three times every 5 seconds.  
A low battery warning (five beeps) is heard in the headset every  
20 seconds.  
You have several minutes of battery reserve. When the battery is  
empty, you first hear the five warning beeps and then a descending  
sequence of tones in the headset. The headset switches off.  
Switching the headset on  
To switch the headset on:  
̈ Press the multi-function button ³ for at least 5 seconds.  
5 s  
An ascending confirmation beep is heard in the headset and the LED ¿  
flashes twice. The LED ¿ then indicates the current operating mode.  
When the LED ¿ flashes three times every 5 seconds, the  
battery is almost empty.  
¿
Searching mode The LED ¿ flashes once every 5 seconds:  
The headset is paired to one or several Bluetooth devices and tries to  
connect to one of these devices.  
5s  
Standby mode The LED ¿ flashes once every 5 seconds:  
The headset is paired to one Bluetooth device and connected but  
– there is currently no active call or  
5s  
– it has not been used for more than 1 hour.  
Call establishment The LED ¿ flashes three times every 4 seconds:  
The headset is paired to a Bluetooth device and is currently establishing a  
call connection.  
4s  
Active call mode The LED ¿ flashes two times every 4 seconds:  
The headset is paired to a Bluetooth device and there is currently an active  
call.  
4s  
Establishing Bluetooth connections  
If the EZX 60 is not yet paired to any device, see “Pairing the headset“ on  
page 12.  
WARNING  
Danger of malfunction!  
The transmitted radio waves can impair the operation of  
sensitive and unprotected devices.  
̈ Only use the headset in aircraft where wireless Bluetooth  
transmission is permitted.  
After switch-on, the headset tries to connect to the Bluetooth  
device to which it was last connected. If this device cannot be  
detected, the headset will go into standby mode.  
11  
 
Putting the EZX 60 into operation  
If a certain Bluetooth connection cannot be established, because the  
corresponding Bluetooth device is switched off or out of range, you can  
manually re-establish the connection as follows:  
̈ Switch off the Bluetooth visibility of all Bluetooth devices in the  
vicinity, except for the Bluetooth device you want to connect to.  
̈ Press the multi-function button ³.  
The LED ¿ flashes once every 5 seconds, indicating that the headset is  
in searching mode.  
When the headset and the Bluetooth device detect each other, the  
connection is established. The LED ¿ flashes 3 times and a high  
confirmation beep is heard in the headset.  
The headset saves up to 8 Bluetooth connection profiles of  
Bluetooth devices with which it has been paired. If you want  
to re-establish a connection with a device with which the  
headset has been paired, the connection needs to be estab-  
lished from this device (for details, refer to the manual of the  
Bluetooth device). Before doing so, make sure that the last  
paired device is disconnected.  
Switching the headset off  
The headset switches off automatically 1 hour after the last Bluetooth  
connection has ended (standby mode).  
To manually switch the headset off:  
̈ Press and hold the multi-function button ³ for 5 seconds.  
5 s  
A descending confirmation beep is heard in the headset and the LED ¿  
flashes 3 times, indicating that the headset switches off.  
Pairing and volume settings are saved automatically when the headset  
is switched off.  
¿
Pairing the headset  
You can pair the headset to up to 8 Bluetooth compliant devices. These  
Bluetooth devices (mobile phones or similar devices) must support the  
“hands free profile” (HFP) or “headset profile” (HSP).  
Once you have paired the headset to a Bluetooth device, the headset auto-  
matically connects to the last paired Bluetooth device each time this  
device and the headset detect each other.  
Pairing to a mobile phone Before pairing to a mobile phone, make sure:  
that the headset’s battery has been charged as described under  
“Charging the headset battery“ on page 10,  
that your mobile phone is switched on and Bluetooth visibility is  
enabled,  
that the headset is switched off and placed close to the mobile phone  
(approx. 20 cm or 7”).  
12  
 
Putting the EZX 60 into operation  
To enter pairing mode:  
̈ Press and hold the multi-function button ³ for 8 seconds.  
8 s  
A sequence of ascending tones is heard in the headset and the LED ¿  
flashes rapidly, indicating that the headset is in pairing mode.  
¿
̈ Once the headset is detected by the mobile phone, select “Sennheiser  
EZX 60” and connect.  
EZX 60  
OK  
When the Bluetooth connection is successfully established, the  
headset is identified as “Sennheiser EZX 60” on the mobile phone  
display.  
Keyword  
0000  
̈ When the mobile phone prompts a keyword, enter 4 zeros (”0000”).  
If pairing was successful, the LED ¿ flashes slowly.  
Some mobile phones require an additional step to connect to the headset.  
For details, refer to the manual of the mobile phone.  
Once paired, most mobile phones are able to automatically transfer the  
audio to the headset and, in addition, show a headset symbol in their  
display.  
Pairing is not successful If pairing is not successful within 5 minutes, the headset returns to  
standby mode.  
̈ On the mobile phone, start a search for Bluetooth devices (see the  
manual of your mobile phone) and follow any instructions displayed on  
the mobile phone display.  
Pairing to other Bluetooth If you wish to pair the headset to other Bluetooth devices such as laptops,  
devices please refer to the manual of the Bluetooth device.  
Pairing to several mobile phones If you wish to pair the headset to another mobile phone, you first have to  
disconnect it from the first mobile phone (see the manual of the first  
mobile phone). The headset saves up to 8 pairing profiles. As soon as the  
headset is switched on, it tries to connect to the mobile phone to which it  
was last connected. If this mobile phone is not detected by the headset,  
you can manually connect it to one of the other 7 mobile phones (see the  
manual of the respective mobile phone).  
To delete the list of the last paired Bluetooth devices, you can  
reset the EZX 60 (see “Restoring factory default settings“ on  
page 19).  
13  
 
»
´
 
Using the EZX 60  
Calling  
Provided the headset is switched on, paired and within the transmission  
range of a mobile phone (see page 12), you can accept and make calls with  
the EZX 60.  
Accepting a mobile phone call When you receive a call via your mobile phone and the headset is already  
switched on, you hear a ring tone in the headset and the LED ¿ flashes  
3 times every 4 seconds. If the mobile phone is set to silent alert or  
vibrating alert, you will hear no ring tone in the headset.  
̈ Press the multi-function button ³.  
An ascending confirmation beep is heard in the headset.  
̈ Start to talk.  
¿
Rejecting call ̈ Double-press the multi-function button ³.  
A descending confirmation beep is heard in the headset. The ringing  
2 x  
stops. Depending on the settings of the mobile phone or Bluetooth  
device, the call is either rejected or transferred to a voice mailbox.  
¿
Making a call ̈ Dial the number on your mobile phone.  
If your mobile phone automatically transfers the call audio to the  
headset, a beep is heard in the headset. If your mobile phone does not  
automatically transfer the call audio to the headset, you have to press  
a button on your mobile phone to manually transfer the call audio to  
the headset.  
̈ Start to talk.  
Redialling the last Redialling the last number dialled is only possible with certain mobile  
number dialled* phones or Bluetooth devices. Please refer to the manual of your mobile  
phone or Bluetooth device.  
̈ Press and hold the multi-function button ³ for 1 to 2 seconds.  
2 s  
A beep is heard in the headset. The last dialled number is redialled.  
If redialling has failed (e.g. because there is no last dialled number stored  
in the mobile phone, the call is rejected by the other party or the other  
party cannot be reached), two descending beeps are heard in the headset.  
* This function must be supported by the mobile phone.  
¿
15  
 
Using the EZX 60  
Voice dialling* The voice dialling function must be supported by your mobile phone or  
Bluetooth device, supporting “hands free profile” (HFP) respectively, and  
be activated.  
̈ Press the multi-function button ³.  
Two ascending beeps are heard in the headset.  
̈ Say the name of the other party that you recorded in the phone.  
The mobile phone or Bluetooth device automatically dials the  
corresponding number. If voice dialling is successful, two ascending  
beeps are heard in the headset.  
̈ Start to talk.  
¿
If voice dialling has failed, two descending beeps are heard in the headset.  
* This function must be supported by the mobile phone.  
Stopping redialling or ̈ To stop dialling during a redialling or voice dialling attempt, press the  
voice dialling*  
multi-function button ³.  
A confirmation beep is heard in the headset. Then either redialling or  
voice dialling is ended.  
* This function must be supported by the mobile phone.  
¿
Ending a call ̈ During the call, press the multi-function button ³.  
A confirmation beep is heard in the headset.  
̈ Refer to the manual of your mobile phone for information on whether  
your mobile phone hangs up automatically or you have to hang up  
manually.  
¿
Transferring an active call ̈ Double-press the multi-function button ³.  
from the mobile phone  
A high confirmation beep is heard in the headset. The call audio is  
transferred from the mobile phone to the headset.  
to the headset*  
̈ Refer to the manual of your mobile phone for information on how to  
2 x  
transfer the call audio from your mobile phone to the headset.  
* This function must be supported by the mobile phone.  
¿
16  
 
Using the EZX 60  
Transferring an active call ̈ Double-press the multi-function button ³.  
from the headset  
to the mobile phone*  
A low confirmation beep is heard in the headset. The call audio is trans-  
ferred to the mobile phone. The headset returns to standby mode.  
* This function must be supported by the mobile phone.  
2 x  
¿
Muting/unmuting the headset’s microphone  
To mute the headset’s microphone during a call:  
̈ Press and hold the multi-function button ³ for 1 to 2 seconds.  
2 s  
Two low mute indication beeps are heard in the headset every  
4 seconds while the microphone is muted.  
¿
To unmute the headset’s microphone:  
̈ Press and hold the multi-function button ³ for 1 to 2 seconds.  
A sequence of low confirmation beeps is heard in the headset. The  
microphone works as usual.  
17  
 
Using the EZX 60  
Changing the speaker volume  
WARNING Hearing damage due to high volumes!  
Listening at high volume levels for long periods can lead to  
permanent hearing defects. Please protect your hearing.  
Sennheiser headsets also sound exceptionally good at low  
volumes.  
̈ Set the volume to a medium level.  
You can only adjust the speaker volume during an active call:  
̈ To increase the volume step-by-step, press the volume up button º.  
̈ To reduce the volume step-by-step, press the volume down button .  
̈ To change the volume continuously, press and hold the respective  
volume button.  
The speaker volume can be adjusted in 8 steps. The volume is factory  
preset to a medium level. When the minimum or maximum volume is  
reached, a high or low beep is heard in the headset. When you switch  
off the headset, the current volume setting is saved.  
º
Depending on your mobile phone you can also change the  
speaker volume using your mobile phone (see the manual of  
the respective mobile phone).  
Changing the ring tone volume*  
You can adjust the ring tone volume while the headset is in standby mode  
(no active call):  
̈ To increase the volume step-by-step, press the Volume up button º.  
̈ To reduce the volume step-by-step, press the Volume down button .  
̈ To change the volume continuously, press and hold the respective  
volume button.  
The ring tone volume can be adjusted in 8 steps. The volume is factory  
preset to a medium level. When the minimum or maximum volume is  
reached, a high or low beep is heard in the headset. When you switch  
off the headset, the current volume setting is saved.  
º
* This function must be supported by the mobile phone.  
18  
 
Using the EZX 60  
If you are out of the transmission range  
Calling is only possible in the Bluetooth transmission range of the mobile  
phone or Bluetooth device, respectively. The transmission range largely  
depends on environmental conditions such as wall thickness, wall compo-  
sition etc. With a free line of sight, the transmission range of most mobile  
phones or Bluetooth devices is up to 10 meters.  
If the headset leaves the transmission range of the mobile phone or  
Bluetooth device:  
The sound quality deteriorates before the connection finally breaks  
down.  
Your mobile phone or Bluetooth device displays the loss of connection.  
Please refer to the manual of your mobile phone or Bluetooth device for  
information on whether the call is automatically transferred to the  
mobile phone or Bluetooth device or requires an acknowledgement to  
do so.  
The headset will then go into standby mode.  
Restoring factory default settings  
You can restore the following settings to their factory default settings:  
speaker volume  
ring tone volume  
pairing  
̈ Set the headset to pairing mode as described under “Establishing Blue-  
tooth connections” on page 11.  
̈ Press the volume up button º and the volume down button three  
times in quick succession (i.e. press º then then º then then º  
then ).  
The LED ¿ flashes 4 times, indicating that the reset was successful and  
the headset then switches off.  
º
¿
19  
 
Cleaning and maintaining the EZX 60  
Cleaning and maintaining the EZX 60  
CAUTION  
Liquids can damage the electronics of the device!  
Liquids entering the housing of the device can cause a short  
circuit and damage the electronics.  
̈ Keep all liquids far away from the device.  
̈ Do not use any cleansing agents or solvents.  
Cleaning the headset  
̈ Only clean with a dry cloth. Do not use any liquids, solvents or cleansing  
agents.  
Storing the headset  
If you do not use the headset for extended periods of time:  
̈ Charge the built-in rechargeable battery every 6 months for about  
1 hour.  
̈ Store the headset in a clean and dry environment.  
20  
 
Accessories  
Accessories  
The following EZX 60 accessories are available from your specialist dealer:  
Cat. No. Accessory/spare part  
504115  
504116  
504117  
504170  
502309  
502310  
EZX 60 power supply, EU version  
EZX 60 power supply, UK version  
EZX 60 power supply, US version  
EZX 60 power supply, AU version  
USB charging cable  
Power supply, EU version,  
for use with USB charging cable (502309)  
502311  
502312  
502313  
504118  
Power supply, UK version,  
for use with USB charging cable (502309)  
Power supply, US version,  
for use with USB charging cable (502309)  
USB car charger adapter,  
for use with USB charging cable (502309)  
EZX 60 earhook  
21  
 
Specifications  
Specifications  
EZX 60  
Dimensions  
Weight  
55 x 26 x 58 mm (W x H x D)  
approx. 12 g  
Standby time  
Talk time  
up to 300 hrs  
up to 7.5 hrs  
Charging time  
before first use: 2.5 hrs  
following:  
10 m  
2 hrs  
Range  
Speaker type  
Microphone type  
Audio  
dynamic, neodymium magnet  
omni-directional electret microphone  
digital noise and echo suppression  
Operating temperature range +10°C (+50°F) to +40°C (+104°F)  
Operating relative humidity  
Storage temperature range  
Storage relative humidity  
20 to 85%, non-condensing  
20°C (4°F) to +60°C (140°F)  
10 to 95%, non-condensing  
EZX 60 power supply unit  
Nominal input voltage  
Nominal input current  
Mains frequency  
100 to 240 V~  
max. 0.2 A  
50 to 60 Hz  
5 V  
Nominal output voltage  
Nominal output current  
max. 150 mA  
Operating temperature range +10°C (+50°F) to +40°C (+104°F)  
Operating relative humidity  
Storage temperature range  
Storage relative humidity  
Weight  
20 to 85%, non-condensing  
20°C (4°F) to +60°C (140°F)  
10 to 95%, non-condensing  
approx. 75 g  
Bluetooth  
®
Bluetooth  
version 2.1 + EDR  
up to 10 m  
2.4 GHz  
Range  
Transmission frequency  
Protocols  
HSP, HFP  
22  
 
Manufacturer declarations  
Manufacturer declarations  
Warranty regulations  
Sennheiser Communications A/S gives a warranty of 24 months on this  
product.  
For the current warranty conditions, please visit our website at  
In compliance with the following requirements  
RoHS Directive (2002/95/EC)  
WEEE Directive (2002/96/EC)  
Battery Directive (2006/66/EC)  
CE Declaration of Conformity  
R&TTE Directive (1999/5/EC)  
EMC Directive (2004/108/EC)  
Low Voltage Directive (2006/95/EC)  
Before putting the product into operation, please observe the respective  
country-specific regulations!  
Statements regarding FCC and Industry Canada  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules and RSS-210 of  
Industry Canada.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment gener-  
ates, uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be deter-  
mined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions:  
1. this device may not cause harmful interference, and  
2. this device must accept any interference received, including inter-  
ference that may cause undesired operation.  
23  
 
Manufacturer declarations  
Changes or modifications not expressly approved by Sennheiser electronic  
Corp. may void the users authority to operate the equipment.  
This Class B digital apparatus complies with Canadian ICES-003.  
Rechargeable batteries  
The supplied rechargeable batteries can be recycled.  
Please return them to your specialist dealer or to your Sennheiser partner.  
WEEE Declaration  
Your Sennheiser Communications product was developed and manu-  
factured with high quality materials and components which can be  
recycled and/or reused. This symbol indicates that electrical and electronic  
equipment must be disposed of separately from normal waste at the end  
of its operational lifetime.  
Please dispose of this product by taking it to your local collection point or  
recycling center for such equipment. This will help to protect the environ-  
ment in which we all live.  
Trademarks  
Sennheiser is a registered trademark of Sennheiser electronic GmbH & Co. KG.  
®
The Bluetooth word mark and logo are registered trademarks and are  
owned by the Bluetooth SIG, Inc.  
24  
 
Sennheiser Communications A/S  
Langager 6, 2680 Solrød Strand, Denmark  
Publ. 12/09  
A02  
 

Q See Security Camera QT426 633 User Guide
Radio Shack Microphone 33 3001 User Guide
RCA Projection Television P52960 User Guide
Remington Pedicure Spa PFS 600 User Guide
Renesas Network Card M16C 30P User Guide
RIDGID Nail Gun R350CHA User Guide
Rosewill Power Supply RU101 User Guide
Sakar Digital Camera 11199 User Guide
Samsung Home Security System SSC17WEB User Guide
S Cam Pressure Washer CS130022 User Guide